75mm Tailstock Shaft Diameter Flant Type CNC Lathe Machine CKI6150
Quick details:
1. Adopting the 980TDI CNC system, in addition to the traditional RS-232 interface, it also supports U disk transmission, speeding up the program transmission speed; the operation is also more convenient
2. Servo motor adopts a large number of motors, featuring large torque and fast response.
3. Guide rails and ball screws adopt a centralized automatic lubrication system, which can periodically and quantitatively inject oil to each lubrication part to ensure uniform lubrication of each moving surface, effectively reducing frictional resistance, improving movement accuracy, and ensuring the service life of guide rails and ball screws.
Product advantage
1. It is made from the whole cast-iron, which is heavy enough with good rigidity and
stability.
2. Three gears controlled by a handle, stepless speed regulation, with lower noise and
high- standard machining accuracy, is an environmental- protective machine.
3. The spindle is the high- rotate speed and sophisticated bearing with smooth surface.
The extra size diameter of the spindle bore is φ82mm while the diameter of chuck is
φ250mm.
4. The machine through the numerical control system could automatically process the inside and outside cylinder surface, cone surface, circular, arc surface, end face etc. Also can process the single and multiple threads in metric, inch and other standards.
Specification Of Flat Bed CNC Lathe Machine CKI6150
| Item | Unit | CKI6150 |
| Max swing over table | mm | 500 |
| Max swing diameter over carriage | mm | 290 |
| Spindle head | | D8 |
| Max processing length | mm | 1500 |
| X axis Travel | mm | 295 |
| Z axis Travel | mm | 1300 |
| Spindle through hole diameter | mm | 82 |
| Spindle motor | kw | 7.5 |
| Spindle rotation speed | rpm | Spindle 3 grades gear box:45-180, 180-750, 600-1600r/min manual 24 grades, 9-1600r/min |
| Servo motor connection type | | Direct connection |
| X axis rapid feed | m/min | 6 |
| Z axis rapid feed | m/min | 8 |
| Tool width*height | mm | 25*25 |
| Turret center height | mm | ≤145 |
| Tailstock Shaft diameter*travel | mm | φ75*120 |
| Tailstock taper | | MT5 |
| Positioning accuracy | mm | 0.01 |
| Power | kw/h | 10 |
| Dimension | mm | 2490*1420*1600 |
| Net weight | kg | 2300 |
Standard Accessories:
GSK 980TDi Controller system, servo motor and driving
Cutting fluid system
Working light
Spindle
Auto lubrication system
Machine cover
Operation unit
4 position electronic turret+3 jaw chuck
Leveling pad
Manual tailstock
Tools and toolbox
Technical documents
Optional accessories:
3 jaw hydraulic chuck
Auto feed bar
Product Tags:
|
|
75mm Tailstock Shaft Flat Bed CNC Lathe Machine , Large CNC Centre Lathe Images
|
